Epifanes Woodfinish Gloss 1000ml, WFG.1000
Epifanes Woodfinish Gloss 1000ml, WFG.1000
Product Description:
Epifanes Woodfinish Gloss 1000ml (WFG.1000) offers a clear, high gloss varnish-like beauty with outstanding U.V. protection and especially suited on oily, resinous tropical wood and American pine.
The best varnish alternative for the continuous maintenance of impregnating wood oil systems. Excellent adhesion to well degreased and sanded teak, iroco and other oily and resinous types of wood. If a maximum of 5 coats are applied, this oil varnish still allows the wood to breathe. Further build-up will close the wood.
Woodfinish Gloss is a high build coating and offers a hard varnish-like finish without sanding between coats! The perfect alternative to traditional varnish as recoatable after 24 hours and no sanding if re-coated within 72 hours.
Offers excellent flow, high gloss, durability, high flexibility and water-resistant in all weather conditions and identical in high gloss finish to Epifanes Gloss Varnish.
Made from phenolic based resins, tung oil, and UV inhibitors, it builds quickly for a high gloss finish with long lasting beauty. Formulated for extraordinary protection, even in tropical climates, Epifanes Woodfinish Gloss is also recommended as a sealer and filler for wood.
Reduce with Epifanes Brush Thinner or Spray Thinner for 1-Part Paint & Varnish if necessary. May be used on new work, on bare solid wood (teak, iroco) and plywood both for inside and outside above the waterline, for maintenance of intact existing (1- and 2-component) varnishes regardless of brand. Not suited for direct use on epoxy resin.
Available in 500 ml or 1000 ml sizes. Also available in Woodfinish Matte.
Features and Benefits:
- Ultra high gloss finish with outstanding U.V. protection
- Use on Teak and other find hardwoods
- Eliminates sanding between coats!
- Super flow for easy application
- Excellent flexibility, water resistance and weather durability in all climates, even tropical
- High build capacity
- Compatible over most existing varnishes
Technical Information:
Type | One-component varnish alternative based on phenolic-modified alkyd resins and tung oil with microscopic porosity properties. |
Color | Opaque in the can. Light milky color after steering, but dries up clear. |
Gloss | Ultra high gloss |
Recommended Uses | Specifically formulated for oily woods like teak and iroco. For long lasting protection of all marine or household woods. Interior and exterior wood above the waterline. |
Film Characteristics | Superior flow, gloss and durability. Excellent flexibility and water resistance in all climatic conditions. High build capability. Offers excellent adhesion to oily woods, especially teak. If recoated within 72 hours, does not require sanding. |
Container Size | 500 ml, 1000 ml |
Density | 0.92 kg./liter |
Solids Content | 50 +/- 2 vol. % |
Recommended Film Thickness | Per coat wet - 50 micron Per coat dry - 30 micron |
Application | Brush, roller, conventional air spray, H.V.L.P., airless. |
Drying times at 65F / 65% RH | Tack free - 2 hours Tape free - 24 hours Dry - 24 hours Recoatable - 24 hours |
Spray Application | Conventional air: Thin as needed up to 15% with Epifanes Spray Thinner for Paint & Varnish. Spray viscosity 18 - 22 seconds Din Cup 4, 14 - 18 seconds Ford Cup 4. Nozzle 1.5 mm. - 1.8 mm. Pressure 2 - 3 Bar. |
Additives | Epifanes Accelerator, Epifanes Retarder |
Application Conditions | Temperature should be between 50F. and 85F. during application. Air humidity below 85%. Avoid varnishing in too much wind or sun. A rapid loss of solvents will occur under these conditions and will decrease the flowing ability. Add thinner up to the specified percentage to compensate for the faster release of solvents. Epifanes Wood Finish Gloss is compatible with most other types of one-component alkyd or urethane based varnishes and over two-component varnishes. Any existing finish must be intact, degreased and sanded prior to recoating. |
Download Technical Data Sheet by clicking here
Surface Prep and Application Info:
Oily resinous tropical wood like teak, contains substances that may cause problems during and after finishing. i.e. slow drying or poor adhesion. These problems may be overcome by thorough and correct preparation and by the correct use of this product. Ensure that the wood is dry. Degrease the wood thoroughly with Epifanes Spray Thinner For Paint & Varnish or denatured alcohol. Do not use water. Sand the bare wood to a fresh surface with 60 - 80 grit dry abrasive paper with the grain of the wood. A block may be used to assist in fairing the surface. Finish sand with 100 - 120 grit dry abrasive paper. For oily woods, finish sand to 220 grit dry abrasive paper. Brush application with a good quality, clean, natural bristle brush will give good results. Try an Epifanes brush for the ultimate varnishing experience.
Maintenance Info:
If the existing coats of Wood Finish gloss are intact and only a degrease of gloss is noticed, one or more coats may be applied on a well cleaned, degreased and sanded surface. Prepare the surface with 320 grit wet or dry abrasive paper. For the annual maintenance of Wood Finish Gloss over non-oily woods, apply a minimum of one or two coats, on a well cleaned, degreased and sanded surface.
-
$9 Flat Rate Ground Shipping Available
No HAZMAT fees and discounted $9 Flat Rate Ground Shipping is available for most shipments to all lower 48 US States. Expedited ground shipping options also available.
-
Don't Forget the Paint Sundries!
Paint SundriesWe offer a wide selection of high-quality paint sundries such as brushes, rollers, painters tape, and abrasives to help you successfully complete your project all at prices lower than big box hardware stores.